http://www.dvinfo.net/forum/view-video-display-hardware-software/479831-hp-dreamcolor-calibration.html
- Q: “‘ve got HP Dreamcolor monitor connected to MacPro via BlackMagic HD LinkPro (display port) to monitor FCP footage. I managed to calibrate the monitor using APS soft and the Xrite/HP calibrator. During the calibration the monitor is connected to MacPro via DVI cable and works as a computer monitor. Then I disconnect one and use BlackMagic to feed the signal. Is the calibrated profile stored in the monitor regardless of the signal source”
- A: “I’ve done some testing and it looks like the calibrated profile stays regardless the connection. “
This entry was posted on Wednesday, June 23rd, 2010 at 15:52 and is filed under DreamColor. You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.